Before You Begin - SawStop TSA-FOT Owner's Manual

BEFORE YOU BEGIN

The drawings show how to assemble the Folding Outfeed Table for the SawStop
i
T-Glide Fence System – Industrial Series (CBFR and TGI2), but the assembly
instructions for the SawStop T-Glide Fence System - Professional Series (TGP2) and
SawStop Premium Fence Assembly (PFA) are similar, and any differences are explained.
i
The rear rail on your saw must be fully installed before installing the Folding
Outfeed Table.
The instructions for installing the Folding Outfeed Table are slightly different for a
SawStop Industrial Cabinet Saw (with CBFR or TGI2 rails), a SawStop Professional
Cabinet Saw (with TGP or TGP2 rails), a SawStop Professional Cabinet Saw (with
PFA rails), and a SawStop Contractor Saw (with TGP or TGP2 rails).
The icons below refer to the three different models of SawStop table saws
compatible with the Folding Outfeed Table: Industrial Cabinet Saws, Professional
Cabinet Saws and Contractor Saws. If an installation step includes one or more
of these icons, the step should only be performed if you are mounting the Folding
Outfeed Table to that model of saw. If an installation step does not include an icon,
the step should be performed for all models of saw.
5
TSA-FOT OWNER'S MANUAL
PAGES:
5-6