Setting Enabling Conditions; Saving Extended Option Output - Brother BAS H Series Instruction Manual

* To clear the setting value, unselect the condition check box and then select "Spare" in the screen.
* The setting details will be saved in the sewing machine (in the panel internal memory).
Refer to "Applying extended option output to the sewing machine" on page 84.

Setting enabling conditions

The following conditions can be set.
■ Enabling conditions
3 conditions can be specified.
* Refer to "Table of condition number" (page 85)
■ Disabling conditions
Up to three disabling conditions can be entered.

Saving extended option output

The extended option output created by the programmer can be saved into the panel internal memory.
1. Touch .
【When saving a new program】
The save screen will open, so select the extended
option output program number.
CHAPTER 4 EXTENDED OPTION OUTPUT (PROGRAM)
* Refer to "Table of condition number" (page 85).
* If enabling conditions are not set, it is always in
the enabled status. To use the extended option
output conditions without changing any, do not
set any value as enabling conditions.
* To clear the setting value, select "Spare" in the
conditions screen.
2. Touch
The extended option output will be saved and the
display will return to the extended option output
settings.
* If you do not want to save the extended option
output, touch
option output settings.
* Up to a maximum of 99 extended option outputs
can be saved in the panel internal memory. In
addition, the setting data can be written to
external storage media (SD card or USB media).
BAS H series, Programmer
.
to return to the extended
81