Pattern with curves
This section describes how to program shapes which include curved lines, using an actual program as an example.
Be sure to press
twice to make a split at corner points C or E. If a split is not made, the corner will be rounded.
Making more intermediate points such as points B, D, F, G, and H creates smoother curves.
1.
Carry out steps 1 to 3 in "Programming procedure"
(page 17).
2.
Touch
.
3.
Touch
.
4.
Use the jog key to move the cursor
When a split is made
to B.
BAS H series, Programmer
CHAPTER 3 PROGRAMMING PATTERNS
When a split is not made
5.
Press
.
6.
Repeat steps 4 and 5 to move the cursor
7.
Press
twice to insert a split.
8.
Move the cursor
9.
Press
twice to insert a split.
10. Move the cursor
11. Press
twice.
12. Carry out steps 5 and after in "Programming
procedure" (page 18).
to C.
to E.
to I.
53