Editing Programs (Editing Sewing Points); Deleting A Sewing Point - Brother BAS H Series Instruction Manual

CHAPTER 3 PROGRAMMING PATTERNS
This section describes the icons which are used when editing sewing points and how to use them.

Deleting a sewing point

1. .
Touch
2. .
Touch
3. Touch to set the skipping units (1, 10, 50,
100, 500, 1000, 5000), code display switching (Hide
code, Show code) and the selection method.
■ Selecting continuous sewing points for editing
4. Touch to set the selection method to "Range
select".
5. Use to move the cursor
for the range that you would like to select.
* You can move the cursor according to the skipping units.
* You can move the cursor continuously by holding down
the key.
6. Press .
7. Use to move the cursor
of the range that you would like to select. The sewing
points will change to red, and the points from the start
point to the end point will be selected.
* You can move the cursor according to the skipping units.
* You can move the cursor continuously by holding down
the key.
8. Press .
42
E d i t i n g p r o g r a m s
E d i t i n g p r o g r a m s
Skipping units
Code display
switching
Selection method
Skipping units
Code display
switching
Selection method
to the start point
to the end point
BAS H series, Programmer
( E d i t i n g s e w i n g p o
( E d i t i n g s e w i n g p o
■Manually selecting sewing points for editing
4. Touch
"Manual select".
5. Use to move the cursor
point that you would like to delete.
* You can move the cursor according to the skipping units.
* You can move the cursor continuously by holding down
the key.
6. When you press the
will change to red and it will be selected.
When you press the
sewing point will be unselected.
7. If there is more than one sewing point that you would
like to delete, repeat steps 5 and 6.
* To select all outlines
Hold down
outline.
* To unselect all outlines
Hold down
points.
8. Press .
i n t s )
i n t s )
to set the selection method to
Skipping units
Code display
switching
Selection method
to the sewing
key once, the sewing point
key once, the selected
to select all sewing points in an
to unselect all selected sewing