Deleting A Part Of Data During Programming - Brother BAS H Series Instruction Manual

Deleting a part of data during programming

The following describes how to delete 2 stitches (7 and 8) at point 8 and creating a new program.
1. Touch while programming.
2. Touch .
3. Touch to select "Manual select".
4. Use to move the cursor
5. When you press the
will change to red and it will be selected.
6. Press .
The sewing point at 8 will be deleted.
to 8.
key once, the sewing point
BAS H series, Programmer
CHAPTER 3 PROGRAMMING PATTERNS
7. Repeat steps 4 to 6 to delete the sewing point at 7
also.
The sewing point at 7 will be deleted and the cursor
will move to 6.
8. Continue programming.
71