Brother BAS H Series Instruction Manual page 110

CHAPTER 4 EXTENDED OPTION OUTPUT (PROGRAM)
4. Referring to the "External input of the extended option" table of condition numbers (refer to page 86), set the output
off condition for No. 2 to "off when condition No. 41 (input 1 off) is established". Enter into the setting screen as
follows.
5. Referring to the "External input of the extended option" table of condition numbers (refer to page 86), set the
enabling condition for No. 2 to "Enable
"Disable when condition No. 43 (input 2 off) is established".
6. Touch to overwrite the extended option output.
7. Display the extended option output once more, and then touch
was overwritten in step 6 to the sewing machine.
8. Confirm that sewing commences as the work clamp lowers when both option inputs No. 1 and 2 are ON.
In the example above, the output condition for virtual output No. 2 on is condition No. 40 (input 1 on).
If input 1 is already on when the power is turned on, virtual output No. 2 will not turn on.
102
setting when condition No. 42 (input 2 on) is established". Set
BAS H series, Programmer
to apply the extended option output which