Brother BAS H Series Instruction Manual page 29

■ 9. Loading programs which have already been created
For details on the operation method, refer to "File Manager Functions" (page 112).
1. Touch .
◆ If there is a program which is currently being created, the following dialog screen will be displayed. Select either "Overwrite
current data", "Append to the current data" or "Append to the current data (Split Auto Insert)", and then touch
the following for details on each selection item.
Selection item
Overwrite current data
Append to the current data
Append to the current data (Split
Auto Insert)
2. Touch to select the media to load the file from, and then navigate to the folder to load the file from.
3. Select the file to be loaded from the file list, and then touch
4. The details of the file which have been loaded will appear in the programming screen.
Operation
Discard the data which is currently being created, and display the data which has been
loaded.
The data is connected via feeding to the end of the program which is currently being
edited.
The data is connected via feeding to the end of the program which is currently being
edited, and a code (split) is inserted at the beginning of the loaded data.
.
BAS H series, Programmer
CHAPTER 3 PROGRAMMING PATTERNS
. Refer to
21