Creating Programs; Creating A Line; Creating A Curve - Brother BAS H Series Instruction Manual

CHAPTER 3 PROGRAMMING PATTERNS
■ 10. Deleting programs
1.Touch .
2. The program which is currently being edited will be deleted and the display will return to the initial status.
This section describes icons used for creating and editing program and how to use them.
* For details about operations, refer to "Programming example" (page 51).
* For details on the setting method for zigzag stitches, refer to "Zigzag stitch" (page 59).
* In the program, ● indicates the sewing start point and

Creating a line

1. Touch .
2. Touch .

Creating a curve

1. Touch .
2. Touch .
22

Creating programs

× indicates the sewing end point.
3. Make the settings for each item.
* Refer to "Setting parameters" (page 27) for details
on the setting method.
4. Use the jog key to move the cursor
point, and then press
5. Repeat step 4 until the shape you would like to sew
has been created. Move the cursor
point, and then press
* You can connect straight lines, curves and arcs
together.
3. Make the settings for each item.
* Refer to "Setting parameters" (page 27) for details
on the setting method.
4. Use the jog key to move the cursor
point, and then press
5. Repeat step 4 until the shape you would like to sew
has been created. Move the cursor
point, and then press
BAS H series, Programmer
to the next
.
to the end
twice.
to the next
.
to the end
twice.