CHAPTER 2 SETTING UP YOUR PROGRAMMER
Inserting SD cards and USB media
1. Open the media slot cover.
2. Insert the SD card or USB media into the SD card slot or USB media port of the programmer.
The programmer is compatible with the following SD cards and USB media.
Type
・SD cards (maximum capacity 2 GB)
・SDHC cards (maximum capacity 32 GB)
・USB media (maximum capacity 32 GB)
When removing SD cards and USB media
Check that reading or writing has finished, and then simply remove the storage device.
If the programmer is connected to a PC, first wait until the SD card or the USB media is no longer being accessed by
the PC, and then remove the SD card or USB media.
8
3594B
BAS H series, Programmer
Setting location
4290B
3597B