Measuring Distances - Brother BAS H Series Instruction Manual

CHAPTER 3 PROGRAMMING PATTERNS

Measuring distances

1. .
Touch
2. .
Touch
3. Touch to set the method for moving the cursor (Move freely, Snap to needle point).
4. Use the jog key to move the cursor
5. Press .
6. Use the jog key to move the cursor
* The distance between the measurement start position and the current cursor position is displayed as ⊿ X and ⊿ Y.
* The line linking the measurement start position and the current cursor position is displayed.
50
to the start point that you would like to measure.
to the position that you would like to measure.
BAS H series, Programmer