Inserting A Straight Line Into A Pattern - Brother BAS H Series Instruction Manual

CHAPTER 3 PROGRAMMING PATTERNS

Inserting a straight line into a pattern

This describes how to add a new pattern to an existing program or pattern which has already been created.
* The procedure introduced here is the procedure when "Settings" -> "Programmer" -> "Consecutive Data Input" is set
to "OFF".
1 ） When inserting a straight line before the selected pattern
[Before inserting straight line]
1. Touch .
2. Use to move the cursor
3. Touch .
4. Touch .
5. Touch to select "Insert".
74
[After inserting straight line]
#2 →
6.
7. Press
8. Use the jog key to move the cursor
to outline #2.
9. Press
* Repeat steps 8 and 9 until the shape of the pattern
10. Press
BAS H series, Programmer
Use the jog key to move the cursor to the position
where you would like to insert the pattern.
to provisionally set the start point.
position for the end point of the new pattern to be
created.
to provisionally set the sewing points.
has been created.
to confirm the pattern.
to the