Deleting The First Stitch To Change The Sewing Start Point To The Second Stitch - Brother BAS H Series Instruction Manual

Deleting the first stitch to change the sewing start point to the second stitch

The following describes how to delete the sewing start point of a programmed pattern to make the second stitch as the
sewing start point.
1. Carry out step 8 in "Programming procedure" (page
20).
2. Touch .
3. Touch .
4. Touch to select "Manual select".
5. Use to move the cursor
* You can move the cursor according to the
skipping units.
* You can move the cursor continuously by holding
down the key.
6. When you press the
will change to red and it will be selected.
to 1.
key once, the sewing point
BAS H series, Programmer
CHAPTER 3 PROGRAMMING PATTERNS
7. Press .
The 1 at the white circle for the 1st stitch will be
deleted, and the needle position for the sewing start
point will move to the 2 for the 2nd stitch.
8. Carry out steps 6 and 7 in "Programming procedure"
(page 19, 20).
63