Brother BAS H Series Instruction Manual page 35

◆ Setting parameters
■
Operation method
Parameters are displayed in a list at the right edge of the screen, so touch
■
Details of parameter settings
Icon Parameter
Method for Appending *1
Method for moving cursor
Rotation direction *2
Line type
Running pitch *3
Zigzag pitch *4
Zigzag left width *4
Zigzag right width *4
Number of zigzag stitches *4
Running generation mode *3
Backtack entry mode
Backtack exit mode
Backtack Entry Number of
Stitches *5
Backtack Exit Number of Stitches
*5
Maximum Pitch *7
Split Auto Insert *8
Outline connection
*1 When adding an existing pattern, you can select the method for appending the program (Insert, Append to end, Append to
beginning).
*2 This can only be set when drawing a circle (radius), circle (diameter), semicircle or ellipse.
*3 This can only be set when the line type is set to "Running".
Choices
Insert, Append to beginning, Append to end
Move freely, Snap to needle point
Clockwise, Counterclockwise
Running, V Zigzag, N Zigzag
0.3 - 12.7 mm
0.3 – 20.0 mm (BAS-360H, BAS-365H,
BAS-370H, BAS-375H)
0.1 - 25.5 mm
0.0 - 25.5 mm
2 - 4 stitches
Equal Pitch, Prioritize Pitch
No Back Tack, V Back, N Back, Overlap *6
0 - 9 stitches
0.3 - 12.7 mm
0.3 – 20.0 mm (BAS-360H, BAS-365H,
BAS-370H, BAS-375H)
None, Split w/Needle Up
Feed, Running, Stitch, Baste
BAS H series, Programmer
CHAPTER 3 PROGRAMMING PATTERNS
to make the settings.
27