Factory Reset - CEA DIGITECH vision PULSE Series Operator's Manual

FACTORY RESET

The purpose of this menu is to allow the operator to return the welding machine partially or totally to the factory settings.
To access the FACTORY RESET Menu from the SETUP Menu:
• Turn the ENCODER K
NOB
• Push the ENTER/MEM K
EY
ENCODER K
Within the FACTORY RESET Menu it is possible, by rotating the ENCODER K
from the 5 functions available:
Function
RESET PROGRAM
RESET PROGRAM (0011)
RESET PROCESS DATA MIG/MAG SYNERGIC
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
EXECUTE PROGRAM RESET?
RESET PROCESS DATA
RESET PROGRAM (0011)
RESET PROCESS DATA MIG/MAG SYNERGIC
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
EXECUTE DATA PROCESS RESET?
DELETE ALL JOBS
RESET PROGRAM (0011)
RESET PROCESS DATA MIG/MAG SYNERGIC
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
CONFIRM DELETE ALL JOB?
COUNTER ALARMS RESET
RESET PROGRAM (0011)
RESET PROCESS DATA MIG/MAG SYNERGIC
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
EXECUTE COUNTER ALARMS RESET?
TOTAL RESET
RESET PROGRAM (0011)
RESET PROCESS DATA MIG/MAG SYNERGIC
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
EXECUTE TOTAL RESET?
- SX to select the desired icon.
.
MENU K
EY
SX K
EY
- SX
NOB
Used to return the Special functions (Fx) of the PROGRAM that the operator is using to
their DEFAULT settings (only for welding processes for which welding programs are set
beforehand).
NOTE: The welding PROGRAM NUMBER for which the Special Functions (Fx) are to be
returned to the factory settings is indicated on the VISION S
Used to return the Special functions (Fx) of the welding PROCESS the operator is using
to their DEFAULT settings.
NOTE: The welding PROCESS for which the Special Functions (Fx) are to be returned to
the factory settings, is indicated on the VISION S
Used to delete all the JOBS saved previously by the operator.
WARNING: Remember that, when it leaves the factory the welding machine DOES NOT
HAVE any JOB saved in it!
Used to reset the counters for all the alarms (Curr. - Tot. ---- see ERROR LOG Menu) that
have occurred in the welding plant.
WARNING: This operation resets the counters for the alarms but does not delete the
individual alarms!
Used to return the welding plant to the factory settings.
WARNING: Resetting will take place as soon as the key is released to confirm the
operation!
RESET PROGRAM
RESET PROCESS DATA
DELETE ALL JOBS
COUNTER ALARMS RESET
TOTAL RESET
NOB
Description
60
ENTER/MEM K
EY
DX K
EY
ENCODER K - DX
NOB
VISION S
CREEN
- SX, to select the individual RESET required,
.
CREEN
.
CREEN
SETUP Menu