Password - CEA DIGITECH vision PULSE Series Operator's Manual

PASSWORD

The purpose of this menu is to allow the operator to enter a PASSWORD for accessing the SETUP Menu.
To access the PASSWORD Menu from the SETUP Menu:
• Turn the ENCODER K
NOB
• Push the ENTER/MEM K
EY
ENCODER K
The VISION S
can have various configurations, the meaning of which is indicated in the table below.
CREEN
Diaplay VISION
DESCRIPTION
000
***
Number between 001 and 999
SET PASSWORD
011
STORE PASSWORD?
SET PASSWORD
077
STORE PASSWORD?
SET PASSWORD
000
STORE PASSWORD?
To exit the PASSWORD Menu and go back to the SETUP Menu:
• Push the MENU K
.
EY
- SX to select the desired icon.
.
MENU K
EY
SX K
EY
- SX
NOB
The SETUP Menu ARE NOT protected by any PASSWORD.
The SETUP Menu ARE protected by any PASSWORD.
The SETUP Menu ARE protected by a PASSWORD and this can be seen by the
operator only because they are working inside the SETUP Menu.
ENTERING A NEW PASSWORD
To enter a new PASSWORD proceed as follows:
• Make sure that the VISION S
• Choose the new PASSWORD to be entered by rotating the ENCODER K
• Push the ENTER/MEM K
EY
• Push the SX K
to confirm and finalise entering of the new PASSWORD.
EY
• To cancel the operation of entering a PASSWORD push the DX K
EDITING THE EXISTING PASSWORD
WARNING: This operation is only possible after having accessed the SETUP Menu using the password
you wish to edit!
To edit the existing PASSWORD proceed as follows:
• Make sure the VISION S
between 001 and 999).
• Choose the new PASSWORD to be entered by rotating the ENCODER K
• Push the ENTER/MEM K
EY
• Push the SX K
to confirm and finalise editing of the PASSWORD.
EY
• To cancel the operation of editing a PASSWORD push the DX K
DELETING THE EXISTING PASSWORD
WARNING: This operation is only possible after having accessed the SETUP Menu using the password
you wish to delete!
To delete the existing PASSWORD proceed as follows:
• Make sure the VISION S
between 001 and 999).
• Take the VISION S to number 000 by rotating the ENCODER K
CREEN
• Push the ENTER/MEM K
EY
• Push the SX K
to confirm and finalise deleting of the PASSWORD.
EY
• To cancel the operation of deleting a PASSWORD push the DX K
SET PASSWORD
000
displays the text 000.
CREEN
to confirm the operation of entering the PASSWORD.
shows the PASSWORD entered previously (a number that must be
CREEN
to confirm the operation of editing the PASSWORD.
shows the PASSWORD entered previously (a number that must be
CREEN
to confirm the deletion of the PASSWORD.
57
ENTER/MEM K
EY
DX K
EY
ENCODER K - DX
NOB
VISION S
CREEN
Meaning
- DX.
NOB
.
EY
- DX.
NOB
.
EY
- DX.
NOB
.
EY
SETUP Menu