Special Functions Menu (Set Up Fx) - CEA DIGITECH vision PULSE Series Operator's Manual

To access the WELDING MODE SELECTION Menu (MODE) push the MENU K
PARAMETER DISPLAY S
PARAMETER SELECTION LED - A
PARAMETER SELECTION K
WELDING MODE SELECTION K
WELDING MODE SELECTION LED
WELDING MODE SELECTION K
WELDING MODE SELECTION LED

2 - SPECIAL FUNCTIONS Menu (SET UP Fx)

To access the SPECIAL FUNCTIONS Menu (SET UP Fx) push the SPECIAL FUNCTIONS (F
ENCODER K
MENU K
EY
ENCODER K - SX
NOB
ENTER/MEM K
EY
DX K
EY
ENCODER K - DX
NOB
"HT4" CONTROL PANEL
- A
CREEN
- A
EY
ENCODER K - A
NOB
WIRE K
EY
EY
Scrolls the various welding modes available in succession.
EY
Displays the welding mode selected.
"DH" CONTROL PANEL
MENU K
EY
SX K
EY
- SX
NOB
Used to access subsequent menus if there are any.
Used to select the various SPECIAL FUNCTIONS (Fx).
Used to access the PRE-SETTING selected in the MODE chosen and with the changes
made to the SPECIAL FUNCTIONS (Fx).
If held down for 2 seconds it makes it possible to return the value for the SPECIAL
FUNCTION (Fx) selected to the DEFAULT value.
Used to change the selected SPECIAL FUNCTION (Fx) value.
EY
PRE GAS 0.5 s
DEFAULT
33
.
HOLD Function LED
PARAMETER DISPLAY S
CREEN
PARAMETER SELECTION LED - V
PARAMETER SELECTION K
ENCODER K - V
NOB
GAS K
EY
SPECIAL FUNCTIONS (F
X
SPECIAL FUNCTIONS (F
X
MIG-MAG manual
) K .
X EY
ENTER/MEM K
EY
DX K
EY
ENCODER K - DX
NOB
VISION S
CREEN
- V
- V
EY
) K
EY
) LED