Config - CEA DIGITECH vision PULSE Series Operator's Manual

CONFIG

The purpose of this menu is to allow the operator to choose the language for the VISION S
into the ADVANCED SETUP Menu.
To access the CONFIG Menu from the SETUP Menu:
• Turn the ENCODER K
NOB
• Push the ENTER/MEM K
EY
ENCODER K
Within the CONFIG Menu (besides the language selection) it is possible, by rotating the ENCODER K
vanced function required, from the 3 available and it can be ENABLED (this operation does not require confirmation) by ro-
tating the ENCODER K - DX.
NOB
Advanced function
LANGUAGE
ADVANCED CONFIGURATION
LANGUAGE ENGLISH
ADVANCED CONFIGURATION ENABLED
ADVANCED WELDING MODE DISABLED
EQUIPMENT LAYOUT DISABLED
ADVANCED WELDING MODE
LANGUAGE ENGLISH
ADVANCED CONFIGURATION DISABLED
ADVANCED WELDING MODE ENABLED
EQUIPMENT LAYOUT DISABLED
EQUIPMENT LAYOUT
LANGUAGE ENGLISH
ADVANCED CONFIGURATION DISABLED
ADVANCED WELDING MODE DISABLED
EQUIPMENT LAYOUT ENABLED
WARNING: The additional menus are explained in the manual, in the "ADVANCED SETUP Menu" paragraph.
To exit the CONFIG Menu and go back to the SETUP Menu:
• Push the MENU K
.
EY
- SX to select the desired icon.
.
MENU K
EY
SX K
EY
- SX
NOB
Indicates the languages that can be set for the VISION S
As regards the procedure for selecting a language on the VISION S
paragraph in the manual ("Language Selection").
If enabled, this configuration offers the welder the following additional menus (the
following icons will be created in the ADVANCED SETUP Menu):
• ADVANCED CONFIG
• WELD LOG
If enabled, this configuration allows the welder to have further welding modes available to
them (the following icons will be created in the ADVANCED SETUP Menu):
• ADVANCED MODE
If enabled, this configuration allows the welder to configure and personalise the and
related accessories as they wish (the following icons will be created in the ADVANCED
SETUP Menu):
• EQUIPMENT LAYOUT
LANGUAGE ENGLISH
ADVANCED CONFIGURATION DISABLED
ADVANCED WELDING MODE DISABLED
EQUIPMENT LAYOUT DISABLED
Description
59
SETUP Menu
and to transform the SETUP Menu
CREEN
ENTER/MEM K
EY
DX K
EY
ENCODER K - DX
NOB
VISION S
CREEN
- SX, to choose the ad-
NOB
.
CREEN
see the relevant
CREEN