Menu: Display - ABB CoriolisMaster FCH400 Series Operating Instructions Manual

106 CoriolisMaster FCB400, FCH400 CORIOLIS MASS FLOWMETER | OI/FCB400/FCH400-EN REV. E
... 9 Operation
... Parameter descriptions

Menu: Display

Menu / parameter
Display
Language
Contrast
...Operator Pages
Autoscroll
Mass Flow Format
Mass Format
Volume Flow Format
Volume Format
Temperature Format
Density Format
Concentration Format
Date / Time Format
Display Test
Display / ...Operator Pages
...Operator Page 1
...Operator Page 2
...Operator Page 3
...Operator Page 4
Display / ...Operator Pages / ...Operator Page 1 (n)
Display Mode
1st Line
2nd Line
3rd Line
4th Line
Bargraph
Description
Selection of menu language. Available languages:
English, Deutsch, Français, Español, Português, Italiano, Chinese
Contrast setting for the LCD display.
Selection of submenu '...Operator Pages' using
Up to four user-specific operator pages (layouts) can be configured for the process display. If multiple operator pages have
been configured, these can be scrolled through manually on the information level. In the factory setting only Operator Page
1 is enabled.
If Autoscroll is enabled, the 'Autoscroll' function can also be activated on the information level of the operator menu.
In this function, operator pages are automatically displayed in succession on the process screen, changing every 10
seconds. Manual scrolling through pre-configured operator pages as described above is no longer necessary. When auto
scroll mode is enabled, the symbol
Default setting: Disabled.
Selection of number of decimal places (maximum 12) used to display the corresponding process variables.
Set the display format for the date and time.
Start the test of the LCD display with '
LCD display to check the display.
Selection of submenu '...Operator Page 1' using
Selection of submenu '...Operator Page 2' using
Selection of submenu '...Operator Page 3' using
Selection of submenu '...Operator Page 4' using
Configure each operator page. The following variants can be selected:
Off, Graph View, 1x4, 1x6A, 1x6A bar, 1x9, 1x9 bar, 2x9, 2x9 bar, 3x9.
Selecting 'Off' deactivates the corresponding operator page.
Selection of process variable displayed in the respective row.
See table Available process variables on page 80.
Selection of process variable displayed as a bar graph.
• Mass Flow [%]: Mass flow in %
• Volume Flow [%]: Volume flow in %
.
appears in the lower left-hand corner of the display.
'. The display test lasts approx. 10 seconds. Various patterns are shown on the
.
.
.
.