ABB CoriolisMaster FCH400 Series Operating Instructions Manual page 27

CoriolisMaster FCB400, FCH400 CORIOLIS MASS FLOWMETER | OI/FCB400/FCH400-EN REV. E
1 Dual-compartment housing
Figure 5: Transmitter with remote mount design
Transmitter
Housing
IP rating
Cable length
Power supply
Outputs in basic version
Additional optional outputs
External output zero return
External totalizer reset
Forward / reverse flow metering
Counter
Communication
Empty pipe detection
Self-monitoring and diagnosis
Local indicator
Field optimization for flow and density
Concentration measurement 'DensiMass'
'FillMass' filling function
'VeriMass' function
Change from one to two columns
2 Single-compartment housing
Integral mount design (see Figure 4, pos. 1 and 2), remote mount design.
IP 65 / IP 67, NEMA 4X
Maximum 200 m (656 ft), with remote mount design only
100 to 240 V AC, 50 / 60 Hz
11 to 30 V DC, nominal voltage: 24 V DC
Current output: 4 to 20 mA active or passive
Digital output 1: passive, configurable as pulse, frequency or switch output
Digital output 2: passive, configurable as pulse or switch output
The transmitter has two slots in which plug-in cards can be inserted to provide additional inputs and
outputs. The following plug-in cards are available:
• Current output (maximum two plug-in cards simultaneously)
• Digital output (maximum one plug-in card)
• Digital input (maximum one plug-in card)
• Modbus or PROFIBUS DP interface (maximum of one plug-in card)
• 24 V DC loop power supply for active outputs (maximum one plug-in card)
Yes
Yes
Yes
Yes
HART® protocol 7.1, Modbus® or Profibus DP® (using a plug-in card)
Yes, via configurable density alarm
Yes
Yes
Yes
Yes, optional on models FCB450 and FCH450
Yes, optional on models FCB450 and FCH450
Yes, optional
27