Menu: Display - ABB ProcessMaster FEP611 Operating Instructions Manual

7.5.5

Menu: Display

Menu / parameter
Display
Language
Contrast
...Operator Page 1
...Operator Page 2
Autoscroll
Flow Format
Tot Format
Date Format
Display Test
Display / ...Operator Page 1 (n)
Display Mode
1st Line
2nd Line
3rd Line
Bargraph
56 OI/FEP610/FEH610-EN Rev. B | ProcessMaster FEP610, HygienicMaster FEH610
Description
Selection of menu language.
(German, English, French, Spanish, Italian, Chinese, Portuguese)
Contrast setting for the LCD display.
Selection of submenu "...Operator Page 1" using
Selection of submenu "...Operator Page 2" using
If Autoscroll is enabled, the "Autoscroll" function can also be activated on the information level of the operator
menu.
In this function, operator pages are automatically displayed in succession on the process screen, changing every 10
seconds. Manual scrolling through pre-configured operator pages as described above is no longer necessary.
When Autoscroll mode is enabled, the icon
Default setting: Disabled.
Selection of number of decimal places (maximum 6) used to display the corresponding process variables.
Default setting: X.XX
Set the display format for the date.
Default setting: YYYY.MM.DD
Start the test of the LCD display with "
on the LCD display to check the display.
Configure each operator page.
The following variants can be selected:
Off, Graph View, 1x4, 1x6A, 1x6A bar, 1x9, 1x9 bar, 2x9, 2x9 bar, 3x9.
Selecting "Off" deactivates the corresponding operator page.
Selection of process variable displayed in the respective row.
— Qv [unit]: Volume flow in the selected unit
— Qv [%]: Volume flow in %.
— ∑V+: Volume totalizer forward flow
— ∑V-: Volume totalizer reverse flow
— ∑Vn: Volume totalizer net
— CO1 Current: Current output in mA
Selection of process variable displayed as a bar graph.
— Qm [%]: Mass flow in %
— Qv [%]: Volume flow in %
— CO1 Current: Current output in mA
.
.
is displayed on the lower left of the screen.
". The display test lasts approx. 10 seconds. Various patterns are shown
— Qm [unit]: Mass flow in the selected unit
— Qm [%]: Mass flow in %.
— ∑M+: Mass totalizer forward flow
— ∑M-: Mass totalizer reverse flow
— ∑Mn: Mass totalizer net
— scaled velocity: Flow velocity