2.2.11.3 Profibus DP via D‑SUB
D-SUB assignment - bushing
• 1: Shield
• 3: RxD TxD - P: High-Level
• 4: RTS-signal
• 5: DGND: Ground, neg. Potential of aux voltage supply
• 6: VP: pos. Potential of the aux voltage supply
• 8: RxD TxD - N: Low-Level
The connection cable must be shielded. The shielding has to be fixed at the screw which
is marked with the ground symbol at the back side of the device.
EMR-3MP0
6
9
1
5
NOTICE!
www.eaton.com
2.2 EMR-3MP0 – Installation and Wiring
2 Hardware
99