Motor Start / Transition Trips - Eaton EMR-3MP0 Installation, Operation And Maintenance Manual

4.2.3

Motor Start / Transition Trips

The motor is tripped during the start phase, in case that:
• The Start Control detects an unsuccessful start. (See
• There is an Incomplete Start Sequence. The device detects via an digital input that
the external process is not properly started.
• If a reverse direction is detected but reversing is not allowed. (See
Non-Reversing
• If case of a Zero Speed Switch trip.
EMR-3MP0
Starter".)
www.eaton.com
4 Protective Elements
4.2 Motor Starting and Control Module
╚═▷ "Start Control".)
╚═▷ "Reversing or
141