Eaton EMR-3MP0 Installation, Operation And Maintenance Manual page 23

Motor Relay
EMR-3MP0
Modbus TCP + DNP3.0 TCP/UDP (Fiber optic interface,
LC connector, 100MB)
Modbus RTU + DNP3.0 RTU (RS485 /
terminals) + IEC 61850 + Modbus TCP + DNP3.0
TCP/UDP (Ethernet 100MB, RJ45)
Conformal Coating Options
Conformal Coated Circuit Boards
Mounting Options
Standard Mount
Projection Panel Mount
Example
The catalog number identification table defines the electrical characteristics and
operation features included in the EMR-3MP0. For example, if the catalog number were
EMR-3MP0‑2A0BB1, the device would have the following:
EMR-3MP0
• -2 – Fixed catalog number
• (A) – 4 DI, 4 Outputs, Removable Terminals, 1 4...20 mA Analog Output, URTD
interface, IRIG‑B, small display.
• (0) –Phase Current 5 A, Ground Current 5 A, Power Supply Range: 19-300 Vdc,
40-250 Vac.
• (B) – Modbus RTU + DNP3.0 RTU (RS485 / terminals)
• (B) – Conformal Coated Circuit Boards
• (1) – Projection Panel Mount
EMR-3MP0
‑2 # #
www.eaton.com
1 EMR‑3MP0 Motor Protection Relay
1.2 Information About the Device
# #
L
T
B
#
0
1
23