Memory Operation On Home Channels; (Channels Hom 001 To Hom 004) - Yaesu FT-100D Operating Manual

Memory System Operation
MEMORY OPERATION ON HOME CHANNELS
(CHANNELS HOM
001
TO HOM
004)
Four special one-touch HOME channels are available, for special frequencies you use often.
Separate HOME channels are available for HF (HOM 001: any frequency between 1.8 and
29.7 MHz), 50 MHz (HOM 002),144 MHz (HOM 003), and 430 MHz (HOM 004).
These memories may prove particularly useful for monitoring propagation beacons, pro-
viding one-touch recall of the beacon frequencies for quick checks of band conditions.
HOME CHANNEL STORAGE
I. Tune the desired frequency, and set the operating mode and bandwidth.
2. Press the [FUNC] key, as needed, to recall Operating Function Row 2 [V>M, M>V,
RPT, REV], then press the [A](V>M) key momentarily to enter the "Memory Check"
mode.
3. Rotate the
SELECT
knob to recall the HOME channel ("HOM 001" through "HOM
004") on which you wish to store the current frequency data.
4. Press and hold in the [A](V>M) key for
Y,
second until you hear a double beep, which
confirms that the frequency information was successfully stored.
HOME CHANNEL RECALL
I. Press the
[HOME]
key momentarily to recall the Home Channel on the band group
where you currently are operating (HF, 50 MHz, 144 MHz, or 430 MHz). The "HOM"
icon will appear on the display.
2. Press the [HOME] key once more to return to the previously-used frequency (either a
VFO frequency or a memory channel).
FT-100
MICRO MOBILE OPERATING MANUAL
73