Receiver Operation; Operating Function Selector ([Func] Key); Icon Display - Yaesu FT-100D Operating Manual

Receiver Operation
The FT -100 includes a wide variety of features which may be used to enhance reception.
Before you explore these features, it is important to understand the proper utilization of the
OPERATING FUNCTION SELECTOR" key
([FUNCD
and the
[A], [B], [C],
and
[0]
keys,
which often are used to activate or change various features of the FT -100 in everyday
operation.
OPERATING FUNCTION SELECTOR ([FUNC] KEY)
FulI access to the many fulI range offeatures provided on the FT -100 would require many
more controls and switches than could possibly fit on the tiny front panel of the transceiver.
Therefore, the FT-IOO utilizes a flexible OPERATING FUNCTION SELECTOR key, labeled
[FUNC],
to provide access to these many features via the [A], [B], [C], and [0] keys.
The
[FUNC]
key must be pressed correctly, as there are two modes of
[FUNC]
key opera-
tion which are often used.
o
Pressing the
[FUNC]
key momentarily causes this key to serve as the OPERATING
FUNCTION SELECTOR.
o
Pressing and holding in the
[FUNC]
key for
Y,
second activates the "MENU" mode,
used to customize many aspects of the transceiver's configuration. The MENU mode
is detailed in the chapter beginning on page 82.
Basic Operation Of the [FUNC] Key
1. Press the
[FUNC]
key momentarily. Note that the labels on the LCD just above the
[A]
~
[0]
keys will change. Repeatedly pressing the
[FUNC]
key wilI scroll the LCD through
the
nine
rows of features provided via the OPERUING FllNCTlON SELECTOR.
2. Once the row containing the desired feature is located, press the [A], [B], [C], or [0]
key to select the desired function within that row.
3. Next, depending on the feature being utilized, you may be instructed to press the same
key again to toggle the current setting to a new state (e.g. from OFF to ON).
If you don't see the operating functions appear on the LCD, you may have
held the IFUNCI key in too long - putting you in the
"Mnvu"
mode. Press
IFUNCI again to escape and start over.
ICON DISPLAY
The left side of the FT-J
~O's
LCD includes a handy [con display field, which alerts you to
many aspects of the transceiver's current operating status.
34 FT-JOO
MICRO MOBILE OPERATING MANUAL