Yaesu FT-100D Operating Manual page 87

Menu Operation
MENU MODE SELECTIONS AND SETIINGS
Menu Item 06
[OW-TIME]
Function: Set the polling interval for the Dual Watch System.
Available Values: I - 10 second
Default: 5 second
This Menu Item defines the amount of time the Dual Watch System will dwell on VFO-A
before checking VFO-B for activity.
Menu Item 07
[DCS CODE]
Function: Setting the DCS Code.
Available Values: 104 standard DCS
codes.
~~-r-+~r-+-~-+~--~+--r-+~
Default: 023
The available DCS codes are shown in the
1--+--+-+---1f--t---+--+--+--t-+--+--+-l
chart.
Menu Item 08
[DGS ENC/DEC]
Function: Select "Normal" or "Inverted" DCS cording.
Available Values: tn-m1tn-rr/tr-m1tr-rr
Default: tn-m
tn-m (ENC: Normal, DEC: Normal)
tn-rr (ENC: Normal, DEC: Inverted)
tr-m (ENC: Inverted, DEC: Normal)
tr-rr (ENC: Inverted, DEC: Inverted)
Keep this selection set with both parameters "Normal" (the default setting) unless you are
certain that the other station(s) will be using "Inverted" DCS coding.
Menu Item 09
[ARTS BEEP]
Function: Select the ARTS beep mode.
Available Values: rAng/ALL/oFF
Default: ALL
rAng: A high-tone beep will sound when the radio first detects that you are within range,
and a low beep will sound when the other station goes out of range.
ALL: A high-tone beep will sound every time a polling transmission is received from the
other station, and a low beep will sound once when the other station goes out of
range.
oFF: No alert beeps sound; you must look at the display to determine current ARTS
status.
FT-IOO
MICRO MOBILE OPERATING MANUAL
85