Mode Selection; Setting The Audio Volume Level; Setting The Operating Frequency - Yaesu FT-100D Operating Manual

Micro-mobile
Hide thumbs Also See for FT-100D:
Table of Contents

Advertisement

Basic Operation
MODE SELECTION
I. Press the [MODE] key repeatedly to toggle among the four "Macro" settings for the
operating mode:
SSB (LSB or USB) -7 CW -7 AM -7 FM -7 SSB (LSB or USB) ...
When operating on frequencies
below 10 MHz,
the default SSB mode is LSB;
above
10 MHz,
the default SSB mode is USB.
2. To reverse SSB modes, press and hold in the [MODE] key for
Y,
second to toggle
between LSB
!:::;
USB.
3. Similarly, pressing and holding in the [MODE] key while in the CW mode allows
selection of either the CW
!:::;
CW-R (Reverse) mode.
4. Pressing and holding in the [MODE] key for
Y,
second while in the AM mode allows
selection of either AM
!:::;
DIG (Digital).
5. Pressing and holding in the [MODE] key while on FM allows selection of either FM or
W-FM (Wide FM).
The operating mode will be preserved on each band's VFO, so that when you
return to a particular band, you will return to the mode you were using the
last time you operated on that band.
SETTING THE AUDIO VOLUME LEVEL
I. Rotate the AF control to set a comfortable listening level.
2. When operating in the "DIG" mode, you may set the AF control to any comfortable
setting, or even all the way off, because the output from the DATA jack is a fixed-level
audio signal.
jt ' .';
Start with the AF control set fully counter-clockwise, especially when using
,
~
FM (the background noise on FM can be surprisingly loud)!
-
/
SETTING THE OPERATING FREQUENCY
I. Rotate the MAIN DIAL to set the frequency. Clockwise rotation of the MAIN DIAL
increases the operating frequency.
2. You may also use the SELECT knob to adjust the operating frequency. In the VFO
mode, the SELECT knob functions as a "channelized" tuning dial, allowing quick
excursions around the band.
jt ' ';
Both the synthesizer's tuning steps and tlte tuning rate (the number of steps
,
~
per rotation of the MAIN DIAL) can be adjusted. See page 35 for details.
<::d.-
/
FT-IOO
MICRO MOBILE OPERATING MANUAL
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents