Yaesu FT-100D Operating Manual page 29

Front Panel Controls and Switches
[eJ·~~>t;
• . ·
[C]·Ke~r:::·:; lllli[f!~2y~j,
MTR
TUN
PRO
VOX
Press the
[AI
key to Press the
[BI
key to
Press the
[el
key to Press the [01 key to
select the display activate the optional
activate the Speech enable the VOX
function of the Meter
FC-20 Automatic
Processor (SSB/AM (voice-operated
in the transmit mode
Antenna Tuner or
modes only). transmitter switch-
(ALC or SWR indi-
ATAS-100 Active-
Press and hold the
ing) system in the
cation).
Tuning Antenna
[el
key for Y, second
SSB, AM, and FM
System.
to recall MENU #27
modes.
Press and hold the (for setting the com-
Press and hold the
[BI
key for Y, second
pression level).
[01 key for Y, second
to initiate tuner or
to recall MENU #54
antenna retuning.
(to set the VOX
Gain level).
WRI
PLY
BK
KYR
Press and hold the
Press the
[BI
to
Press the
[el
key to Press the [01 key to
[AI key for Y, second
send the message
activate CW Break- activate the built-in
to enable the stor-
recorded via the [AI in operation.
Electronic Keyer.
itt
age of a CW mes-
key.
Press and hold the Press and hold the
sage (50 characters
maximum length).
[el
key for Y, second [01 key for Y, second
to recall MENU #51 to recall MENU #46
(for selecting Full- or (for setting the Elec-
Semi-Break-In
tronic Keyer mode).
CW).
ONR
ONF
OBP
Press the [AI key to
Press the
[BI
key to
Press the
[el
key to No function.
activate the DSP
activate the DSP's
activate the DSP's
Noise Reduction
Auto Notch filter. receiver Bandpass
system.
Filter.
Press and hold the
In the SSB, AM, FM
[AI
key for Y, second
and AFSK modes,
to recall MENU #17
press and hold the
(to select one of the
[el
key for Y, second
9
four available Noise
to recall MENU #18 to
Reduction settings).
adjust the high-fre-
quency cutoff of the
DSP Bandpass Fil-
ter via the SELECT
knob.
In the CW mode,
press and hold the
[el
key for Y, second
to recall MENU #20
(for setting the CW
Bandwidth).
*
The Operating Function number in this column does not appear on the LCD.
FT-100
MICRO MOBILE OPERATING MANUAL
27