Yaesu FT-100D Operating Manual page 73

Memory System Operation
MEMORY OPERATION ON "REGULAR" MEMORY CHANNELS
(CHANNEL
#001
TO
#300)
MEMORY CHANNEL RECALL
I. If you currently are in the VFO tuning mode, press the [VFO/MR] key once to enter the
"Memory" mode (the "MEM" icon will appear on the display).
2. To select another memory channel, tum the SELECT knob.
3. To restrict your memory channel selection just to one Memory Group (50 channels),
press and hold the SELECT knob for
Yz
second. Now, the "GCH" icon will appear on
the display, and only those channels within the current Memory Group will be available
for recall via step 2. above.
4. To change Memory Groups, press and hold the SELECT knob for Yz
second again (the
"GCH" icon will disappear), then tum the SELECT knob to step through the channels
until you enter another group (a Group Number will not appear at this time). You may
now press and hold the SELECT knob for Yz
second to restrict memory channel access
to the newly- selected Group.
5. Once you are operating on a memory channel, you may tune off of the originally-
memorized frequency (as though you were in the VFO mode). Just rotate the MAIN
DIAL knob or pressing the SELECT knob momentarily; the "MEM" icon will be re-
placed by one which indicates "MT," indicating that you have now shifted into the
"Memory Tuning" mode. When operating the Memory Tuning mode, if you find an-
other frequency you wish to store into another memory channel,just press the [A](V>M)
key momentarily, select a new memory channel via the SELECT knob, then press and
hold the [A](V>M) key for
Yz
second (until you hear the double beep). To exit the
Memory Tuning mode, press the [VFO/MR] key as follows:
o
One touch of the [VFO/MR] key returns you to the original memory frequency.
o
A second touch of the [VFO/MR] key will cause you to exit the Memory mode and
return to the VFO mode (the "MEM" indicator will be replaced by "V-A" or "V-B").
ft " . . ';
To simplify the memory recall process, press the [STEP] key first, then rotate
~
the SELECT knob to recall only channels on which data is stored (vacant
;'
~-
memory channels will be skipped).
To revert to normal operation, press the [STEP] key again.
FT-JOO
MICRO MOBILE OPERATING MANUAL
71