Af Speech Processor Operation - Yaesu FT-100D Operating Manual

Transmitter Operation
SSB
TRANSMISSION
(j)
While still in Operating Function Row 7 [MTR, TUN, PRO, VOX], press and hold in
the [D](VOX) key for Yz second. This instantly recalls
MENU
#54 (VOX GAIN).
~
While speaking into the microphone, rotate the MAIN DIAL to the point where the
transmitter is quickly activated by your voice, without causing background noise to
activate the transmitter.
Q)
When you have selected the optimum setting, press the [FUNC] key momentarily
to save the new setting and return to normal operation.
6. The "Hang Time" of the VOX system (the transmit-receive delay after the cessation of
speech) may also be adjusted via the
MENU.
The default delay is Yz second. To set a
different delay time:
(j)
Press and hold in the [FUNC] key for Yz second to activate the
MENU
mode.
~
Rotate the SELECT knob to select
MENU
#55 (VOX DELAY).
Q)
Rotate the MAIN DIAL while saying a brief syllable like "Ah" so as to set the
desired delay time.
@)
When you adjustment is complete, press the [FUNC] key momentarily to save the
new setting and return to normal operation.
AF
SPEECH PROCESSOR OPERATION
The AF Speech Processor increases your average power output while operating on SSB
and AM modes.
\. Press the [FUNC] key, as necessary, to recall Operating Function Row 7 [MTR, TUN,
PRO, VOX].
2. Press the [C](PRC) key to activate the AF Speech Processor. The "PRC" icon will
become Bold.
3. Now press the PTT key (unless you have VOX enabled), and speak into the micro-
phone in a normal voice level, as usual.
4. To deactivate the AF Speech Processor, again press the [C](PRC) key.
S. The Compression Level may be adjusted via the
MENU,
as follows:
(j)
While still in Operating Function Row 7 [MTR, TUN, PRO, VOX], press and hold in
the [C](PRC) key for Yz second. This instantly recalls
MENU
#27 (CaMP LEVEL).
~
Rotate the MAIN DIAL to set a new level of Compression (the default value is "50%").
Q)
When you have made your selection, press the [FUNC] key momentarily to save
your new setting and return to normal operation.
@)
Make some on-the-air checks, or use a monitor receiver in your station, to ensure
that good voice quality has been obtained via your adjustment.
~ '
, / E\:cessive advancement
0/
tile Compression Level may lead to distortion. Eacll
~
operator's voice pattern is different, so try several settings to find tile one
~ <:a -
which is best/or your voice.
FT-IOO
MICRO MOBILE OPERATING MANUAL
49