Microphone Switches - Yaesu FT-100D Operating Manual

G) OWN
Button
Microphone Switches
YAESU
CONDENSER MIC
MH-42
Note: P, P1, and P2 button functions
can be changed via the
MENU
system.
Seepage 37.
Press this button to tune downward in the current step increment, hold this button in to
start scanning toward a lower frequency.
®
UP
Button
Press this button to tune upward in the current step increment, hold this button in to
start scanning toward a higher frequency.
@PTTSwitch
Press this switch to transmit, and release it to receive.
@ ACC
Button (HOME)
Pressing button key recalls a favorite
"HOME"
frequency memory.
@
P
Button (VFO/MR)
Pressing this button switches frequency control between the VFO and Memory Sys-
tems.
®
LOCK Switch
Slide this switch upward to lock (disable) the microphone buttons.
(j)
P1
Button
(BAND Down)
Pressing this button will cause the frequency to be switched to the next-lowest band.
®
P2
Button
(BAND
UP)
Pressing this button will cause the frequency to be switched to the next-highest band.
FT-IOO
MICRO MOBILE OPERATING MANUAL
29