Locking Front Panel Controls; Setting The Display Brightness - Yaesu FT-100D Operating Manual

Receiver Operation
LOCKING FRONT PANEL CONTROLS
The front panel [LOCK] button allows you to disable the MAIN DIAL and/or the front
panel controls.
In the transceiver's default configuration, pressing the [LOCK] key disables just the MAIN
DIAL, while the other keys and switches are unaffected. To lock out the remainder of the
controls and the SELECT knob, use
MENU
#57 (lOCK KEY):
I. Press and hold in the [FUNC] key for Yz second to enter the
MENU
mode.
2. Rotate the SELECT knob so as to recall
MENU
#57 (lOCK KEY).
3. Rotate the MAIN DIAL to change the setting from "diAL" (lockout of MAIN DIAL
only) to "PAnEL" (lockout of all controls except the [LOCK] key).
4. When you have made your selection, press the [FUNC] key momentarily to save the
new setting and exit to normal operation.
When the controls are locked out, press the [LOCK] key once more to release them to
normal operation.
It "",
If
MENU
#58
(AM&FM CLICK) is set to the "on" position, the
MAIN DIAL
[!l _ will be disabled during AM and FM operation. In these modes, if you attempt
/ ':(;,1 . • .
to rotate the
MAIN DIAL,
the "LOCK" icon will appear as a reminder that
the
SELECT
knob must be usedfor frequency selection.
SETTING THE DISPLAY BRIGHTNESS
The illumination of the display is preset at the factory for satisfactory brightness in most
environments. The illumination level may, however, be too intense for nighttime opera-
tion. You may change the brightness level by using the
MENU
system, as follows:
1. Press and hold in the [FUNC] key for Yz second to activate the
MENU
mode.
2. Rotate the SELECT knob to recall
MENU
# 13 (DIMMER SET).
3. Rotate the MAIN DIAL to set a new brightness level. The available values range from
1 (Bright) to 63 (Dim), plus "Off" (Brightest).
4. When you have made your selection, press the [FUNC] momentarily to save the new
setting and return to normal operation.
38 FT-JOO
MICRO MOBILE OPERATING MANUAL