Microphone Programmable Function Buttons - Yaesu FT-100D Operating Manual

Receiver Operation
STACKED
VFO
SYSTEM
I. Press the [FUNC] key, as needed, until Operating function Row 1 [AlB, A=B, SPL,
11MB] appears on the display.
2. Now press the [A](A/B) key (the AlB function) to toggle between the "A" and "B"
VFO on the band on which you are currently operating. There are two such VFOs
provided on each Amateur band, so you may set VFO-A to the CW sub-band, and
VFO-B to the SSB sub-band, if you like. The operating mode will be preserved, along
with the frequency information, on each VFO.
MICROPHONE: PROGRAMMABLE FUNCTION BUTTONS
The MH-36SSJS and MH-42sSJS microphones include three programmable buttons, la-
beled
P, P1,
and
P2.
These buttons may be used for quick access to frequency control
commands of the FT -100. In the default configuration, the P button controls VFO/MR
(Memory Recall); P1 controls Band Down, while P2 controls Band Up.
The configuration of these buttons can be changed via the
MENU
system:
I. Press and hold in the [FUNC] key for
1;j
second to enter the
MENU
mode.
2. Rotate the SELECT knob to recall
MENU
#59 (MIC SW SET).
3. Rotate the MAIN DIAL to choose from the following configuration options:
4. When you have made your selection,
press the [FUNC] key momentarily
to save the new setting and exit to
normal operation.
FT-IOO
MICRO MOBILE OPERATING MANUAL
37