Yaesu FT-100D Operating Manual page 94

Menu Operation
MENU MODE SELECTIONS AND SETTINGS
Menu Item 44
[144 ARS]
Function: Activate/deactivate the Automatic Repeater Shift when operating on the 144
MHz band.
Available Values: on/oFF
Default: on (depends on transceiver version)
Menu Item 45
[430 ARS]
Function: Activate/deactivate the Automatic Repeater Shift when operating on the 430
MHz band.
Available Values: on/oFF
Default: on (depends on transceiver version)
Menu Item 46
[KEVER TYPE]
Function: Select the keyer paddle operating mode.
Available Values: EL I/EL2/Bug
Default: EL2
This item selects the desired keyer emulation mode for the built-in electronic keyer:
Ell: Iambic keyer with ACS (Automatic Character Spacing) disabled. Weighting is
user-selectable via the Menu Items 47 and 48.
EL2: Iambic keyer with ACS enabled. Weighting is user-selectable via the Menu Items
47 and 48.
Bug: Mechanical "bug" keyer emulation. One paddle produces "dits" automatically,
while the other paddle manually produces "dahs".
Menu Item 47
[DOT SIZE]
Function: Set the DotSpace ratio for the built-in electronic keyer.
Available Values: 0 -125 (0:1 - 12.5:1 DotSpace)
Default: 10 (I: I Dot:Space)
Menu Item 48
[DASH SIZE]
Function: Set the Dash:Space ratio for the built-in electronic keyer.
Available Values: 0 - 125 (0:1 - 12.5:1 Dash:Space)
Default: 30 (3:1 Dash:Space)
Menu Item 49
[eW-DELAY]
Function: Set the receiver recovery time during pseudo-VOX CW semi-break-in opera-
tion.
Available Values: 0 - 2.5 seconds
Default: 0.5 second
The recovery time maybe adjusted in steps of 0.1 second. A longer delay may be prefer-
able if you pause frequently while sending.
92
FT-IOO
MICRO MOBILE OPERATING MANUAL