At System Programming - Yaesu FT-100D Operating Manual

£AT System Programming
The FT-IOO's
~AT
System allows the transceiver to be controlled by a personal com-
puter. This allows multiple control operations to be fully automated as a single mouse
click, or it allows a third-party software package (such as contest logging software) to
communicate with the FT-IOO without (redundant) operator intervention.
The Optional
~AT
Interface Cable CT -62 is a connection cable for the FT -100 and your
computer. The CT-62 has a built-in level converter, allowing direct connection from the
rear panel ACC Cable Pigtail to the serial port of your computer, without the need for an
external RS-232C level converter box.
Yaesu Musen does not produce
~AT
System operating software, due to the wide variety
of personal computers, operating systems, and applications in use today. However, the FT-
100 (and other Yaesu products) are widely supported by third-party software packages,
and we recommend that you contact your dealer for advice, or check advertisements in
amateur radio journals. Most software vendors also have Home Pages on the World Wide
Web which contain a wealth of information on the features and radio support for their
software packages.
The information presented in this section will allow the programmer to understand the
command structure and opcodes used in the FT-! OO's
~AT
System.
96
RS-232C
IL..no'-----'
+- il.:J:::c,'
===lct@-+
CT-62 (Option)
Computer
D
FT-JOO
MICRO MOBILE OPERATING MANUAL