Installation; Installing The Microphone And Front Panel - Yaesu FT-100D Operating Manual

Installation
INSTALLING THE MICROPHONE AND FRONT PANEL
1. Insert the microphone's plug into the recessed jack on the transceiver, as shown in the
drawing.
2. You can position the microphone cable so as to cause it to exit from the side or the
bottom of the transceiver. Just route the cable into the appropriate channel provided, as
shown in the illustration.
3. Install the front panel by sliding it into the position shown; you will hear a "click" when
the panel locks into place.
4. To remove the front panel, use your right thumb to pry open (slightly) the latch on the
right-hand of the panel, then slide the panel outward and away from the transceiver.
6
YAEStJ
Hl'NHFIIIMf"'LLIoIODETRAIII$CEIVE~
FT·1oo0
FT-JOOD
MICRO MOBILE OPERATING MANUAL