Yaesu FT-100D Operating Manual page 96

Menu Operation
MENU MODE SELECTIONS AND SETTINGS
Menu Item 56 [SQURF GAIN)
Function: Select the operation ofthe front panel's SQL/RF knob.
Available Values: SqL/rF
Default: SqL
Menu Item 57 [LOCK MODE)
Function: Select the operation of the front panel's [LOCK] key.
Available Values: diAL/PAnEL
Default: diAL
DiAL: Locks
MAIN DIAL
knob only.
PAnEL: Locks all front keys and knobs (except the [LOCK] key itself1).
Menu Item 58 [AM&FM CLICK)
Function: Enabling/disabling the
MAIN DIAL
knob on the AM and FM modes.
Available: on/oFF
Default: on
Menu Item 59 [MIC SW SET)
Function: Assign the Microphone's Function
switch.
Available Values: 112/3/4
Default: 1 (P button=VFO/MR, P1 button=BAND
DOWN, P2 button=BAND UP)
Menu Item 60 [NB LEVEL)
Function: Setting the degree of IF Noise Blanking.
Available Values: 1
~
16
Default: 10
A higher setting provides more noise blanking action, with a slight loss of fidelity on the
incoming signal.
Menu Item 61 [TUNER/ATAS)
Function: Select the device (FC-20, or ATAS-I 00) to be controlled via the front panel's
[B](TUN) key.
Available Values: oFF 1 AtAS-l 1 AtAS-2/tunEr
Default: oFF
oFF: The [B](TUN) key is disabled.
AtAS-I: The [B](TUN) key will activate the optional ATAS-I 00 on both antenna ports
(an external diplexer will be required).
AtAS-2: The [B](TUN) key will activate the optional ATAS-IOO (on the HF/50 port).
tunEr:
The [B](TUN) key will activate the optional FC-20.
94
FT-JOO
MICRO MOBILE OPERATING MANUAL