Yaesu FT-100D Operating Manual page 93

Menu Operation
MENU MODE SELECTIONS AND SETTINGS
Menu Item 38 [PKT DISPLAY]
Function: Define the displayed frequency offset during Packet operation.
Available Values: -3000 - +3000 Hz
Default: 2125 Hz
You can have the display show the (suppressed) carrier frequency or the center frequency
between the two packet tones.
Menu Item 39 [PACKET TONE]
Function: Align the transceiver to the frequency of the tone pair defined by the TNC.
Available Values: 1170/1700/2125/2210 Hz
Default: 2125 Hz
The above designations of the available values represent the center frequency of the Packet
tone pair during USB/LSB AFSK operation.
Menu Item 40 [HF RPT SHIFT]
Function: Set the magnitude of the Repeater Shift to be utilized when operating on the 28
MHz band.
Available Values: 0 - 10 MHz
Default: 100 kHz
Menu Item 41 [50 RPT SHIFT]
Function: Set the magnitude of the Repeater Shift to be utilized when operating on the 50
MHz band.
Available Values: 0 - 10 MHz
Default: 500 kHz
Menu Item 42 [144 RPT SHIFT]
Function: Set the magnitude of the Repeater Shift to be utilized when operating on the 144
MHz band.
Available Values: 0 - 10 MHz
Default: 600 kHz (Depends on transceiver version)
Menu Item 43 [430 RPT SHIFT]
Function: Set the magnitude of the Repeater Shift to be utilized when operating on the 430
MHz band.
Available Values: 0 - 10 MHz
Default: 5 MHz (depends on transceiver version)
FT-100
MICRO MOBILE OPERATING MANUAL
91