Udp Rang Mode - 3onedata NP318T-8DI User Manual

Setp 5 Enter the listen port "30000" of the serial device server A in the "Dest Port" text box.
Step 6 After completing the above configuration, the serial device server A and the serial
device server B successfully establish the connection, each device serial port can
send and receive serial data.

9.7 UDP Rang Mode

Background brief
When the router, switch and other devices do not support multicast function, the serial
decice server can work in the UDP Rang mode to achieve multicast function.
Assuming that the serial port COM1 of the serial devcie server is connected to the
host computer, it needs to transmit the serial data to two hosts that specify the same
network segment "192.168.1.61" to "192.168.1.62" through the UDP protocol at the
same time.
The parameters of the serial server (UDP server) are as follows:
IP Address: 192.168.1.250

Local Port: 30000

BaudRate: 115200

PairtyBits: None

DataBits: 8

StopBits: 1

The parameters of the host PC A (UDP client A) are as follows:
IP Address: 192.168.1.61

Local Port: 31000

The parameters of the host PC B (UDP client B) are as follows:
IP Address: 192.168.1.62

Local Port: 31000

Operation steps
Setp 1 Configure the IP address of the serial server.
1. Log in to the Web configuration interface and select "Network Setting".
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
85