3onedata NP318T-8DI User Manual page 82

2. In the "Use the following IP address" option box, enter the "IP address", "Subnet
Mask" and "Gateway address" corresponding to the serial server.
3. Other parameters remain the default, click "submit".
Setp 2 Configure the serial port parameter information.
1. Log in to the Web configuration interface and select "Serial Server> COM Settings".
2. Select "COM1" in the "Port" drop-down list.
3. Set the "BaudRate", "DataBits", "StopBits" and "ParityBits" in the "Settings" option
box.
4. Other parameters remain the default, click "Submit".
Setp 3 Configure the working mode of the serial server.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
75