Advertisement
Quick Links
NP5100 Series
Serial Server
Quick Installation Guide
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check the integrity of package and accessories while
first using the serial server.
1. Serial server
2. Quick installation guide
3. Power line x2
4. Network cable
5. Rack-mounting lug x2
6. Foot pad x4
7. Software installation CD
8. Warranty card
9. Certification
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The series products are managed rack-mounted industrial
safe serial servers, including the following models:
Model I. NP5100-2T-32DI-32DI(3IN1)-RJ-OLED-2P(85-265
VAC) (2 10/100Base-T(X) copper ports + 32
RS-232/485/422 serial ports + 1 OLED display + 2
85-265VAC power supplies)
Model II. NP5100-2T-32DI(3IN1)-RJ-2P(85-265VAC) (2
10/100Base-T(X) copper ports + 32
RS-232/485/422 serial ports + 2 85-265VAC power
supplies)
Model III. NP5100-2T-16DI(3IN1)-RJ-OLED-2P(85-265VAC)
(2 10/100Base-T(X) copper ports + 16
RS-232/485/422 serial ports + 1 OLED display + 2
85-265VAC power supplies)
Model IV. NP5100-2T-16DI(3IN1)-RJ-2P(85-265VAC) (2
10/100Base-T(X) copper ports + 16
RS-232/485/422 serial ports + 2 85-265VAC power
supplies)
【Panel Design】
Front View
Model I, Model II
Model III, Model IV
Rear View
Model I
Model II
Model III
Model IV
Top view
Left view and right view
1.
RS-232/485/422 serial port
2.
100M copper port
3.
Console port
4.
DIP switch
5.
Grounding screw
6.
TF card slot
7.
AC power input
8.
Lugs
9.
Serial port transmitting indicator
10. Serial port receiving indicator
11. Running indicator
12. Power indicator
13. Copper port connection indicator
14. OLED display
15. Menu/Exit button
16. Page UP
17. Page Down
Advertisement
Related Manuals for 3onedata NP5100 Series
Summary of Contents for 3onedata NP5100 Series
- Page 1 Model II. NP5100-2T-32DI(3IN1)-RJ-2P(85-265VAC) (2 10/100Base-T(X) copper ports + 32 NP5100 Series RS-232/485/422 serial ports + 2 85-265VAC power supplies) Serial Server Model IV Model III. NP5100-2T-16DI(3IN1)-RJ-OLED-2P(85-265VAC) Quick Installation Guide Top view (2 10/100Base-T(X) copper ports + 16 RS-232/485/422 serial ports + 1 OLED display + 2 85-265VAC power supplies) Model IV.
- Page 2 【Serial Port Connection】 18. Select/confirm button This device provides 3IN1 serial port, which 【Mounting Dimension】 supports RS232, RS485 and RS422 at the same Unit: mm time. The interface type is RJ45 and its pin definitions are as follows: Step 3 Place the device in the rack;...
- Page 3 In case of damaging TF card, user needs to power off Save/Restart: restart the device, skip to step 6 MAC address: MAC address (read only); the device first to change the TF card. for this setting. IP config: IP configuration method (trigger Step 3 Select Server setting on the Menu interface, trigger SEL key configuration)
- Page 4 Indicate Description Console port CLI command management Port has established valid port (RS-232), RJ45 network connection Indicator Power indicator, running status Port is in a network indicator, copper port Link(1-2 Blinking communication status connection status indicator, Port hasn’t established valid serial port receiving indicator, network connection.