3onedata NP318T-8DI User Manual page 84

4. Enter the IP address "192.168.1.250" of the serial server (that is, the Udp server) in
the "Remote IP" text box.
5. In the "Remote Port" text box, enter the port number "30000" for the serial server
(that is, the Udp server), and click "OK".
UDP (User Datagram Protocol), is a connectionless protocol. So after the successful
creation of UdpClient connection, you do not need to click "Start".
Step 5 Simultaneous operation of the "DebugTool" and "ComTest3One" software, test the
serial server (UDP server) and the host PC (UDP client) to communicate with each
other.
1. Install and run the "ComTest3One" software, click "Begin" menu "New Windows".
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
77