Serial Server; About This Chapter; Com Settings - 3onedata NP318T-8DI User Manual

About This Chapter

Content
This chapter

4.1 COM Settings

Function Description
On the "COM settings" page, you can configure basic parameters such as baud rate,
data bit, stop bit and parity bit corresponding to the serial port number. You can also
configure whether the corresponding serial number is enabled for FIFO function, RTS
control, DTR control and Packing length and other advanced parameter information.
Operation Path
Open "serial server > COM settings" in sequence.
Interface Description
COM settings interface screenshot
Hyperlink
4.1 COM Settings
4.2 Checking COM Information
4.3 COM Mode Settings
4.4 COM Mode Information
4.5 Reboot Port
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
4

Serial Server

User Manual
10