Udp Rang Mode - 3onedata NP318T-8DI User Manual

Interface Elements
Dest Port
Apply to all port
The pair slave mode device is automatically changed the communication parameters

according to the pair master mode device. The normal communication needs to be
configured with the same parameters.
Pair mode requires two serial devices. The IP address of the pair slave device as the

destination address of the pair master mode device. The listening port of the pair slave
mode device serves as the destination port for the pair master mode device.

4.3.7 UDP Rang Mode

When the routers and switches and other devices do not support multicast, but also
need to achieve the multicast function, you can make the serial server in UDP rang
mode. In this mode, the serial server through the UDP protocol with the user specified
the same network segment of the host advance serial data transmission, to achieve
point to multipoint data communication. UDP port mode serial device can also receive
data from one or more hosts.
Description
Applied to the pair master mode, that is, the listen port of the
pair slave mode device.
Check the "Apply to all port" check box to apply the current
settings to all serial ports.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
33