Ip Address - 3onedata NP318T-8DI User Manual

Interface Elements

IP address

IP address
Subnet mask
Gateway
The way to get the
DNS server address
Lan2
IP Report
Sever Address
Sever Port
Repeat Time
When the DHCP server assigns a new IP address to the serial server, the host needs to
detect the new IP address of the serial server when the serial server is in a network
environment that dynamically assigns an IP address. When the dynamic IP address
changes, the serial server reports its own IP address to the user by intermittently, so that the
user knows the new IP address of the serial server in time.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
Description
IP address, subnet mask, and default gateway address.
Obtain an IP address automatically: Obtain an IP

address, subnet mask, and default gateway address
automatically.
Configure the IP address manually in the "IP Address" text
box.
Configure the subnet mask manually in the "Subnet mask"
text box.
Configure the gateway address manually in the "Gateway
Address" text box.
Use the following DNS server address: Manually

configure the DNS server address information.
Automatically obtain DNS server address:

Automatically obtain DNS server address information.
Network port 2 network configuration column.
Note：
The default IP for Lan1 is 192.168.8.254.

Refer to the corresponding section of Lan1 in this table for

the description of interface elements.
IP Report configuration column.
Note：
When the serial server adopts the "automatic IP address", it
reports the IP address of the user by intermittently, so that the user
knows the new IP address of the serial server in time.
The server that receives the IP address report.
The port that sends the IP address report.
The sending frequency of IP report.
User Manual
9