3onedata NP318T-8DI User Manual page 97

Setp 6 Simultaneous operation of the "DebugTool" and "ComTest3One" software, test the
serial server, host A and host A to communicate with each other.
1. Install and run the "ComTest3One" software, click "Begin" menu "New Windows".
2. Add serial port "COM1" window, configure the COM, BaudRate, parity, DataBits
and other parameters and WEB interface "COM settings" consistent.
3. Open the "COM1" serial port signal, for example, enter the serial information
"0123456789AB", and click "Manual Send".
4. Run the "DebugTool" software, in the UdpClient option box to view the host A and
host B received the serial information. Similarly, host A and host B can also send
information to the serial device.
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
90