3onedata NP318T-8DI User Manual page 78

Step 3 Configure the working mode of the serial server.
1. Select "COM1" in the "Port" drop-down list.
2. Click the "Work Mode" drop-down list box and select "TCP Client Mode".
3. Click the "Session Number" drop-down list box and select "1".
4. Enter the IP address "192.168.1.61" of the host PC in the "Dest address" text box.
5. Enter the local port number "31000" of the host PC in the "Dest port" text box.
6. Enter the local port number "30000" of the serial server in the "Local port" text box.
7. Enter "30" in the "TCP Alive Time" and "TCP Timeout" text boxes.
8. Other parameters remain the default, click "submit".
Step 4 Run the "DebugTool" software, for the host to create TCP server.
1. To install and run "DebugTool" Software, click "Create Connection" drop-down list
box and choose "Create Network Debugging> TcpServer".
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
71