3onedata NP318T-8DI User Manual page 94

1. Log in to the Web configuration interface and select "Serial Server> COM Mode
Settings".
2. Select "COM1" in the "Port" drop-down list.
3. Click the "Work Mode" drop-down list box and select "UDP Rang Mode".
4. Click the "Session Number" drop-down list box and select "1".
5. In the "Start Address" and "End Address" text boxes, enter the IP address
"192.168.1.61" of Host A and the IP address "192.168.1.62" of Host B, respectively.
6. Enter the port number "31000" of the host in the "Dest Port" text box.
7. Enter the port number "30000" of the serial device server in the "Listen Port" text
box.
8. Other parameters remain the default, click "submit".
Setp 4 Run the "DebugTool" software the host A to create UDP client A.
1. To install and run "DebugTool" Software, click "Create Connection" drop-down list
box and choose "Create Network Debugging> UdpClient".
2. In the "Monitoring IP" drop-down list box, select the IP address "192.168.1.61" of
3onedata proprietary and confidential
Copyright © 3onedata Co., Ltd.
User Manual
87