Download Print this page

3onedata NP302T Series Quick Installation Manual

Serial device server

Advertisement

Quick Links

NP302T Series
Serial Device Server
Quick Installation Guide
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial
Park,
Xili,
Shenzhen
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【Package Checklist】
Please check whether the package and accessories are intact
while using the serial device server for the first time.
1. Serial Device Server
2. Quick installation manual
3. CD
4. Straight-through cable
5. Power adapter
6. Warranty card
7. Qualify certificate
8. RS-232 serial port RJ45 to DB9-Male cable (only for
RS-232 device)
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【Product Overview】
The product is serial device server which can provide serial
device with networking capability instantly. Module as follow:
Model I.
NP302T-2D(RS-232) (2 RS-232 serial ports + 1
100M Ethernet copper port)
Model II.
NP302T-2D(RS-485) (2 RS-485/422 serial ports +
1 100M Ethernet copper port)
【Panel Design】
Model I: Top view, Bottom view and Rear view
Model I: Front view and Side view
Nanshan
District,
1.
RS-232 serial port
2.
10/100Base-T(X) 100M Ethernet copper port
3.
DIP switch
4.
Power input terminal block
5.
Mounting lugs
6.
100M Ethernet copper port status indicator
7.
Power input status indicator
8.
Serial port transmission and receiving data
indicators
Model II: Top view, Bottom view and Rear view
Model II: Front view and Side view
1.
RS-485/422 serial port
2.
10/100Base-T(X) 100M Ethernet copper port
3.
DIP switch
4.
Power input terminal block
5.
Mounting lugs
6.
100M Ethernet copper port status indicator
7.
Power input status indicator
8.
Serial port transmission and receiving data
indicators
【Mounting Dimension】
Unit: mm

Advertisement

loading

Summary of Contents for 3onedata NP302T Series

  • Page 1 Model I. NP302T-2D(RS-232) (2 RS-232 serial ports + 1 100M Ethernet copper port) NP302T Series Model II. NP302T-2D(RS-485) (2 RS-485/422 serial ports + 1 100M Ethernet copper port) Serial Device Server Quick Installation Guide 【Panel Design】 Model I: Top view, Bottom view and Rear view ...
  • Page 2 Step 2 Unscrew the screw on the wall about 2mm. RS-232 TXD RXD RTS CTS DSR GND DTR DCD Step 3 Lift the device upward slightly; take out the device, RS-485/422 serial port disassembling ends.  The Model II provides RS-485/422 port, Serial Note Before Powering on: device server adopts...
  • Page 3 No data or abnormal data is being factory settings via device DIP switch or management software; all modified configurations will be cleared received through serial port. (1-2) after restoring to factory settings, so please backup Blinking Serial port is receiving data. configuration file in advance.