Page 1
/485/422 to to to Ethernet Ethernet Serial Server 16-port port RS 232/485/422 Ethernet Serial Serial Server Server User manual User User manual manual Shenzhen 3onedata Technology Co.,Ltd Shenzhen Shenzhen 3onedata 3onedata Technology Technology Co.,Ltd Co.,Ltd Tel: +86-755-26702688 Fax: +86-755-26703485 www.3onedata.com...
NP308 series User Manual 1. 1. 1. Introduction Introduction Introduction NP316 series can conveniently connect up to 16 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. With NP316 series, you can both centralize the management of your serial devices, and distribute management hosts over the network.
Page 4
NP308 series User Manual Connector: RJ45 Serial Serial Serial Standard: RS-232/RS-485/RS-422 Number of ports: 16 Signals: RS-232:DCD,RXD,TXD,DTR,GND,DSR,RTS,CTS RS-485:Data+,Data-,GND RS-422:TXD+,TXD-,RXD+,RXD-,GND Parity: None, Even, Odd, Space, Mark Data bits: 5bit, 6bit, 7bit, 8bit Stop bits: 1, 1.5, 2 Baud rate: 300bps ~ 460.8Kbps Flow control: RTS/CTS or XON/XOFF Direction control: RS485 side adopt ADDC technology, auto text and control data transfer direction...
NP308 series User Manual 5. 5. 5. Panel Panel Layout Panel Layout Layout NP316 16 16 16-port RS232 to Ethernet NP316 16 16- - - 8 8 8 M M M (8-port RS232+8-port RS485/422) to Ethernet NP316 16 16- - - 16 16 16M M M 16-port RS485/422 to Ethernet NP316E 16-port RS232 to 2 Ethernet ports...
Page 6
NP308 series User Manual 5.2.1 5.2.1 10 10 10/100 /100 Base-T Ethernet port 5.2.1 /100Base-T Base-T(X) (X) Ethernet Ethernet port port The 10/100BaseT(X) ports located on NP316 series front panel. The pin of RJ45 port display as below. Connect by UTP or STP. The connect distance is no more than 100m. 100Mbps is used 100Ωof UTP , 10Mbps is used 100Ωof UTP 3,4,5. ...
Page 8
NP308 series User Manual Start” → “all programs” → “Running I. “Start Start programs Running all programs Running” II. Input default IP address of the device “Telnet: Telnet: 192.168.1.233 192.168.1.233”. Click “OK OK”, setting the IP Telnet: 192.168.1.233 of device by telnet. Choose the menu by “↑, ↓, ←, →” of the keyboard and quit by “ESC ESC”...
Page 9
NP308 series User Manual setting. V. Choose “COMMON COMMON COMMON”, knock “Enter Enter Enter” VI. Choose “Save Save Configuration Configuration”, knock “Enter”, due to save the setting. Save Configuration Page 9 of 12...
NP308 series User Manual 7 7 7 . . . 2 2 2 Create Create Virtual port Create the the Virtual Virtual COM COM port port on on the the PC setup_nt_2K.exe port over tcp/ip.exe I. Setup the “setup_nt_2K.exe setup_nt_2K.exe” software, you will find the “com com port port over over tcp/ip.exe...
Page 11
NP308 series User Manual 1. Input the IP address of the device 2. Input the NO. of the port of the device(input 1~16) 3. Input 300 4. Default the parameter IV. Knock “OK OK”, Knock “Save Save Save”. Then you can use the created the COM5. V.
Page 12
NP308 series User Manual 9. 9. 9. F F F A A A Q Q Q 1. 1. 1. Power Power adapter adapter is is is incorrect incorrect connection connection is is is incorrect incorrect Power adapter incorrect and and connection incorrect Solution: Solution:...